Page 1 of 1

Plugin - VUV Reader and Tool

Posted: December 6th, 2018, 12:50 pm
by qtao
This plugin extends the software to support importing VUV Analytics (*.db) files. It requires the 64-bit edition of the software and a VUV software license obtained separately from VUV Analytics.

Minimum Prerequisites
  • 64-bit Windows Operating System
  • LabVIEW Run-Time Engine 2017 64-bit
  • VUV Analytics Software License
  • GC Image Version 2.6 (64-bit) or later
Installation
  1. Download the latest version here: VUV plugin 1.7.0
  2. Unzip the downloaded file using File Explorer or another application.
  3. Start GC Image.
  4. From the menu, select Tools > Manage Plugins...
  5. Click on Import and then select the vuv.plugin folder.
  6. Press OK to finish the installation. The VUV Plugin items will now be listed in the table.
Usage
For information on how to use the VUV Plugin, view the user guide: select Tools > VUV Help, then click VUV Plugin Userguide.

Previous Versions

VUV Plugin 1.6.2-1.5: download here

Re: Plugin - VUV Reader and Tool

Posted: December 6th, 2018, 1:01 pm
by qtao
VUV Tool Version 1.5 is now available to download.

Improvements
  • Improved backward compatibility with 2.7r2.2 to 2.7r3.1 versions
Installation
  1. Download the latest version from the above post.
  2. Unzip it using File Explorer or another application.
  3. Start Image program.
  4. From the menu, select Tools > Manage Plugins...
  5. Select the old VUV Reader plugin and Remove
  6. Click on Import and then select the vuv.plugin folder from Step 2
  7. Click OK to finish the installation.

Re: Plugin - VUV Reader and Tool

Posted: February 28th, 2020, 4:09 pm
by qtao
VUV Reader Version 1.6.2 is now available to download.

Improvements
  • Show error details if the reader failed due to missing dependencies, and corrupted or unsupported data.
  • Support "wavelength" as MS axis label for v2.9r2 or newer version.
Minimum Prerequisites
  • 64-bit Windows Operating System
  • LabVIEW Run-Time Engine 2014 64-bit
  • VUV USB Dongle
  • GC Image Version 2.6 (64-bit) or later
Installation
  1. Download the latest version from the above post.
  2. Unzip it using File Explorer or another application.
  3. Start Image program.
  4. From the menu, select Tools > Manage Plugins...
  5. Select the old VUV Reader plugin and Remove
  6. Click on Import and then select the vuv.plugin folder from Step 2
  7. Click OK to finish the installation.
Install LabVIEW Run-Time Engine 2014 64-bit
  1. Check if the runtime is installed by following the instructions here:
    https://knowledge.ni.com/KnowledgeArtic ... AK&l=en-US

    With the "Using the System File Browser" approach, you should find the runtime as shown below:
    Image
  2. If the runtime is not installed, please download and install the runtime from here:
    https://www.ni.com/en-us/support/downlo ... tml#329059

    , as follows:
    Image
  3. After the runtime is installed, check if importing a VUV .db file works.

Re: Plugin - VUV Reader and Tool

Posted: April 13th, 2020, 5:51 pm
by cheble
VUV Reader Version 1.7.0 is now available to download.

Improvements
  • Support the new data format of VUVision v3.2.1
  • New VUV Help menu
Minimum Prerequisites
  • 64-bit Windows Operating System
  • LabVIEW Run-Time Engine 2017 64-bit
  • VUV Analytics Software License
  • GC Image Version 2.6 (64-bit) or later
Installation
  1. Download the latest version here: VUV plugin 1.7.0
  2. Unzip the downloaded file using File Explorer or another application.
  3. Start GC Image.
  4. From the menu, select Tools > Manage Plugins...
  5. Click on Import and then select the vuv.plugin folder.
  6. Press OK to finish the installation. The VUV Plugin items will now be listed in the table.